Concept redesign by Bronxo Technologies for engenity. Official site: engenity.com
engenity, LLCDC-powered freeze prevention · Minneapolis, MN Toll-free(844) 288-2590

DC-powered freeze prevention · Minneapolis, MN

Keep engine parts thawed on battery power

engenity builds heating systems that run on DC straight from the engine battery: a burnout-resistant thermostat, heated hoses and heating jackets you install once and rely on.

Solid-state, no moving parts · IP67 · 5-year SoliStat warranty · Distributors in the US, Canada and Europe

engenity lab temperature chamber reading −40.0 °C during SoliStat testing
Fig. 4: IntelliHose C-DEF850M on the engine battery 24 V +− SoliStat heater DEF line, A hose 3/8" ID DEF °F −40°−22°−4°14°23°27° 27°23° FULL DUTY 9 W/ftOFF at 27°FON at 23°F DEF freezes at 12°F

In-house test: DEF in the hose goes from −40°F to liquid in 3 minutes at full duty, then SoliStat holds it between its trip points.

−40°F to 257°F
SoliStat operating range
6 to 24 V DC
standard supply; 48 V built
Up to 30 A
switched current
3 min
DEF thawed from −40°F, C-DEF hoses

Order by part number

Standard models have finished development and testing and are ready for quick production. Order through a distributor.

  • C-DEF850M

    IntelliHose C-DEF850M

    Fits
    Case 850M bulldozers
    Voltage
    24 V
    Full duty
    182 W, 7.5 A
  • C-DEF11/1650M

    IntelliHose C-DEF11/1650M

    Fits
    Case 1150M and 1650M bulldozers
    Voltage
    24 V
    Full duty
    182 W, 7.5 A
  • C-DEF2050M

    IntelliHose C-DEF2050M

    Fits
    Case 2050M bulldozers
    Voltage
    24 V
    Full duty
    182 W, 7.5 A
  • PV200

    IntelliThaw PV200

    Fits
    Mann+Hummel ProVent 200 CCV filter
    Warm-up
    −58°F to 50°F in 5 min
    Startup power
    190 W
  • PV400

    IntelliThaw PV400

    Fits
    Mann+Hummel ProVent 400 CCV filter
    Warm-up
    −58°F to 50°F in 5 min
    Status
    Sample quantities
  • MO-75

    IntelliThaw MO-75

    Fits
    MotoRad MO-75 breather cap
    Warm-up
    −58°F to 50°F in 5 min
    Startup power
    60 W

Proven in the field

From the Greenland ice sheet to remote oilfields.

A thermostat that doesn't burn out on DC

Bimetal thermostats arc every time they switch on DC, pit their contacts and fail, often within 6 to 9 months. SoliStat switches with a transistor and senses with an RTD, so there is nothing to arc or wear.

Two units ran over 1,200,000 cycles at −40°F and 257°F, then over 3,000,000 at room temperature.

See the life test

SoliStat cycle test in the engenity lab

Hold the mayo

Crankcase blow-by condenses on cold hose walls and filters and whips into a "mayonnaise" that blocks breathers, de-rates engines and can stop them starting. Heat stops it.

How mayo forms and how to stop it

Crankcase ventilation filter clogged with frozen blow-by emulsion

One part or a whole engine

We build anything from a single DC thermostat to a custom-molded heating jacket with integrated controls and fitted heaters, using our components or yours, for one unit or thousands.

Custom systems we've built

Custom IntelliHose system on a Caterpillar generator

Request a quote or a sample

Prefer to talk? Toll-free (844) 288-2590, local (612) 767-9590. To order standard parts, go through a distributor.

  1. The part: component or hose manufacturer and model number, and length.
  2. Power: supply voltage and the current the heater or load draws.
  3. Temperatures and quantity: setpoints you need and how many.

Call toll-freeGet a quote