Concept redesign by Bronxo Technologies for engenity. Official site: engenity.com
engenity, LLCDC-powered freeze prevention · Minneapolis, MN Toll-free(844) 288-2590

SoliStat: an industrial thermostat built for DC power

SoliStat 2 is an all-in-one, temperature-controlled switch for DC-powered heating and cooling. A calibrated RTD sensor, a microcontroller and a solid-state switch replace the mechanical parts that fail in other thermostats.

SoliStat DC thermostat in its black nylon housing

Switches up to 30 A

Standard models handle 10 A. 15 A, 20 A and 30 A models are available, and dual-channel models can run a heater and a cooler from one unit.

Rugged and weatherproof

Works in wet conditions and from −40°F to 257°F (−40°C to 125°C). Dust- and water-resistant to IP67, RoHS compliant, ESD protection beyond IEC 61000-4-2 Level 4.

5-year warranty

Solid-state switching means no arcing and no moving parts to wear out, so every SoliStat carries a 5-year limited warranty.

Supply
6 to 24 V DC
Current
up to 30 A
Operating
−40°F to 257°F
Setpoint accuracy
±2.0°F
Sealing
IP67
Warranty
5 years

Features

SetpointsAccurate, tamper-proof; ±2.0°F (±1.1°C); accurate trip points even below 32°F
Operating range−40°F (−40°C) to +257°F (+125°C)
Storage range−76°F (−65°C) to +302°F (+150°C)
StandbyOptional low-power standby/shutdown mode; automatic low-power shutoff below 2.5 V supply
ProtectionIP67; RoHS; withstands ESD beyond IEC 61000-4-2 Level 4

Construction

HousingMineral-filled nylon
Temperature sensorInternal RTD or external type-K thermocouple
Sensor heatsinkAnodized aluminum (models with internal sensor)
LeadsStranded wire, ETFE insulation (MIL-W-22759/16); standard 18 in (46 cm), other lengths available
Power leads12 AWG or 14 AWG
External sensor leads20 AWG
Dimensions2.05 × 1.75 × 0.65 in (52 × 45 × 17 mm)

Standard SoliStat models

SoliStat is fully customizable; these are the standard configurations named in our application notes.

  • 2-10

    SoliStat 2-10

    Current
    10 A
    Switch
    High side
    Channels
    1
  • 2D-5

    SoliStat 2D-5

    Current
    5 A per channel
    Switch
    High side
    Channels
    2 (heat and cool)
  • 2X-15

    SoliStat 2X-15

    Current
    15 A
    Switch
    High side
    Sensor
    External
  • 2XD-10

    SoliStat 2XD-10

    Current
    10 A per channel
    Switch
    High side
    Used in
    IntelliHose models
  • 2-20

    SoliStat 2-20

    Current
    20 A
    Switch
    Low side
    Channels
    1
  • 2X-30

    SoliStat 2X-30

    Current
    30 A
    Switch
    Low side
    Sensor
    External

Common questions

What can a SoliStat switch?

Heaters, fans, pumps or anything else that draws a fair bit of current on DC and needs to switch on or off with temperature.

How do I get a SoliStat?

Through any of our distributors, usually within 3 to 4 days with no minimum quantity. For a free quote or a sample, call (844) 288-2590.

Can the setpoint be changed in the field?

No. Setpoints are factory programmed and tamper-proof, which is why operators who need it to stay put choose it.

Get a quote: SoliStat DC thermostats

Prefer to talk? Toll-free (844) 288-2590, local (612) 767-9590. To order standard parts, go through a distributor.

  1. The part: component or hose manufacturer and model number, and length.
  2. Power: supply voltage and the current the heater or load draws.
  3. Temperatures and quantity: setpoints you need and how many.

Call toll-freeGet a quote