Concept redesign by Bronxo Technologies for engenity. Official site: engenity.com
engenity, LLCDC-powered freeze prevention · Minneapolis, MN Toll-free(844) 288-2590

ThermEvolve: control is what makes engine heating reliable

Heating engine components reliably has been an open question for decades, and it got more urgent when EPA Tier III (EU Phase 3) added freeze-prone emission-control parts. ThermEvolve is the control behind IntelliHose and IntelliThaw.

Cutaway of an IntelliThaw jacket on a crankcase ventilation filter

No overheating, no underheating

Uncontrolled heaters big enough for the coldest days overheat in normal weather. Self-limiting heaters run uneven or underpowered. ThermEvolve runs full-power heaters but limits them to a temperature safe for everything they touch.

No controller burnout

DC from an engine battery fries mechanical thermostats. ThermEvolve uses SoliStat, which averages well over 5 million switch cycles against the five to ten thousand of conventional thermostats.

Fast, frugal, cold-proof

It delivers heat as fast as the part can absorb it, usually reaching operating temperature in 5 minutes or less, then sips power and saves it for engine startup. Works down to −40°F (−40°C).

Options and subsystems on any ThermEvolve system

  • Bypass (shutdown) mode: power the heater off completely during idle periods, from a dash switch or the engine control unit.
  • System ready and system fault lights: check the heating circuit at a glance.
  • Fusing and crowbar circuit: power the system down automatically after a fault or a severe disturbance such as lightning.
  • Multiple channels: run several heaters, or a heater and a cooler, from one controller.

Common questions

Is ThermEvolve a product?

It is the control technology at the core of the IntelliHose and IntelliThaw product lines.

How cold can ThermEvolve systems work?

Down to −40°F (−40°C).

How fast do they warm up?

Usually 5 minutes or less to operating temperature.

Get a quote: ThermEvolve control

Prefer to talk? Toll-free (844) 288-2590, local (612) 767-9590. To order standard parts, go through a distributor.

  1. The part: component or hose manufacturer and model number, and length.
  2. Power: supply voltage and the current the heater or load draws.
  3. Temperatures and quantity: setpoints you need and how many.

Call toll-freeGet a quote